Edge-Core ECS4810-12M Layer 2 Management Manual page 114

| Using the Web Interface
C 3
HAPTER
Navigating the Web Browser Interface
Table 6: Switch Main Menu (Continued)
Menu
Show
Alarm
Event
Configure Interface
Add
History
Statistics
Show
History
Statistics
Show Details
History
Statistics
Cluster
Configure Global
Configure Member
Add
Show
Show Candidate
Show Member
ERPS
Configure Global
Configure Domain
Add
Show
Configure Details
Configure Operation
CFM
Configure Global
Configure Interface
Configure MD
Add
Configure Details
Show
Description
Shows all configured alarms
Shows all configured events
Periodically samples statistics on a physical interface
Enables collection of statistics on a physical interface
Shows sampling parameters for each entry in the history group
Shows sampling parameters for each entry in the statistics group
Shows sampled data for each entry in the history group
Shows sampled data for each entry in the history group
Globally enables clustering for the switch; sets Commander status
Adds switch members to the cluster
Adds candidate members to the cluster
Shows the cluster members
Shows candidate members
Shows cluster switch member; managed switch members
Ethernet Ring Protection Switching
Activates ERPS globally
Creates an ERPS ring
Shows list of configured ERPS rings, status, and settings
Configures ring parameters
Blocks a ring port using Forced Switch or Manual Switch commands
Connectivity Fault Management
Configures global settings, including administrative status, cross-
check start delay, link trace, and SNMP traps
Configures administrative status on an interface
Configure Maintenance Domains
Defines a portion of the network for which connectivity faults can
be managed, identified by an MD index, maintenance level, and
the MIP creation method
Configures the archive hold time and fault notification settings
Shows list of configured maintenance domains
– 114 –
Page
473
476
478
481
478
481
478
481
483
484
485
485
485
485
487
488
492
493
493
493
493
509
513
516
520
520
520
520
520