Edge-Core ECS4810-12M Layer 2 Management Manual page 166

| Interface Configuration
C 5
HAPTER
Port Configuration
Name – Name of sample interval.
◆
To configure a periodic sample of statistics:
Click Interface, Port, Statistics, or Interface, Trunk, Statistics.
1.
Select Add from the Action menu.
2.
Select an interface from the Port or Trunk list.
3.
Enter the sample name, the interval, and the number of buckets
4.
requested.
Click Apply.
5.
Figure 36: Configuring a History Sample
To show the configured entries for a history sample:
Click Interface, Port, Statistics, or Interface, Trunk, Statistics.
1.
Select Show from the Action menu.
2.
Select an interface from the Port or Trunk list.
3.
Figure 37: Showing Entries for History Sampling
– 166 –