D
H
ISPLAYING
ARDWARE
/S
V
OFTWARE
ERSIONS
Use the System > Switch page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
CLI R
EFERENCES
◆
"System Management Commands" on page 683
P
ARAMETERS
The following parameters are displayed:
Main Board Information
◆
Serial Number – The serial number of the switch.
Number of Ports – Number of built-in ports.
◆
Hardware Version – Hardware version of the main board.
◆
Main Power Status – Displays the status of the internal power supply.
◆
◆
Redundant Power Status – Displays the status of the redundant
power supply.
Management Software Information
Role – Shows that this switch is operating as Master or Slave.
◆
EPLD Version – Version number of EEPROM Programmable Logic
◆
Device.
Loader Version – Version number of loader code.
◆
Diagnostics Code Version – Version of Power-On Self-Test (POST)
◆
and boot code.
Operation Code Version – Version number of runtime code.
◆
– 123 –
| Basic Management Tasks
C
4
HAPTER
Displaying Hardware/Software Versions