Edge-Core ECS4810-12M Layer 2 Management Manual page 167

To show the configured parameters for a sampling entry:
Click Interface, Port, Statistics, or Interface, Trunk, Statistics.
1.
Select Show Details from the Action menu.
2.
Select Status from the options for Mode.
3.
Select an interface from the Port or Trunk list.
4.
Select an sampling entry from the Name list.
5.
Figure 38: Showing Status of Statistical History Sample
To show statistics for the current interval of a sample entry:
Click Interface, Port, Statistics, or Interface, Trunk, Statistics.
1.
Select Show Details from the Action menu.
2.
Select Current Entry from the options for Mode.
3.
Select an interface from the Port or Trunk list.
4.
Select an sampling entry from the Name list.
5.
– 167 –
| Interface Configuration
C 5
HAPTER
Port Configuration