Troubleshooting System Alarms - Cisco BTS 10200 Troubleshooting Manual

Troubleshooting System Alarms

Troubleshooting System Alarms
This section provides the information needed to monitor and correct system alarms.
of the system alarms in numerical order and provides cross reference to each subsection in this section.
Table 12-3 BTS 10200 System Alarms
Alarm Type Alarm Name
SYSTEM(2) Inter-Process Communication Queue Read Failure—System (2)
SYSTEM(3) Inter-Process Communication Message Allocate Failure—System (3)
SYSTEM(4) Inter-Process Communication Message Send Failure—System (4)
SYSTEM(6) Index List Insert Error—System (6)
SYSTEM(7) Index List Remove Error—System (7)
SYSTEM(8) Thread Creation Failure—System (8)
SYSTEM(10) Index Update Registration Error—System (10)
SYSTEM(11) Index Table Add Entry Error—System (11)
SYSTEM(12) Software Error—System (12)
SYSTEM(13) Multiple Readers and Multiple Writers Maximum Q Depth Reached—System (13)
SYSTEM(14) Multiple Readers and Multiple Writers Queue Reached Low Queue Depth—System
(14)
SYSTEM(15) Multiple Readers and Multiple Writers Throttle Queue Depth Reached—System (15)
Inter-Process Communication Queue Read Failure—System (2)
The Inter-Process Communication Queue Read Failure alarm (minor) indicates that the IPC queue read
has failed. The primary cause of the alarm is that there is a problem with IPC communication. To correct
the primary cause of the alarm, contact Cisco TAC.
Refer to the
Note
detailed instructions on contacting Cisco TAC and opening a service request.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
12-14
"Obtaining Documentation and Submitting a Service Request" section on page lvi
Chapter 12 System Troubleshooting
Table 12-3 lists all
Alarm Severity
MINOR
MINOR
MINOR
MINOR
MINOR
MAJOR
MINOR
MINOR
MAJOR
CRITICAL
MINOR
MAJOR
for
OL-8723-19