Chapter 4 Maintaining And Troubleshooting The Isdn System; Status And Control Commands - Cisco BTS 10200 Troubleshooting Manual

Class-independent softswitch

Hide thumbs Also See for BTS 10200:

Table of Contents

Maintaining and Troubleshooting the ISDN

System

Revised: January 31, 2008, OL-12436-02

This chapter describes ISDN maintenance and troubleshooting commands and procedures for the

Cisco BTS 10200 Softswitch. See also the Cisco BTS 10200 Softswitch Troubleshooting Guide for more

details about causes and corrective actions related to events and alarms.

This section describes the status and control commands for ISDN.

Table Name: ISDN-DCHAN

Table Containment Area: EMS, Call Agent

Command Types

Status and control

Examples

Status isdn-dchan dchan-type=primary;

Status isdn-dchan dchan-type= backup;

Control isdn-dchan dchan-type=primary; mode=forced; target-state=oos;

Control isdn-dchan dchan-type=backup; mode=forced; target-state=oos;

Control isdn-dchan dchan-type=primary; mode=forced; target-state=ins;

Control isdn-dchan dchan-type=backup; mode=forced; target-state=ins;

OL-12436-02

C H A P T E R

Cisco BTS 10200 Softswitch ISDN Provisioning and Troubleshooting

4-1

Table of Contents