Signaling (94) - Cisco BTS 10200 Troubleshooting Manual

Chapter 10 Signaling Troubleshooting

SIGNALING (94)

To troubleshoot and correct the cause of the alarm, refer to the
(94)" section on page
DESCRIPTION Invalid Conference Identifier
SEVERITY MINOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Gateway ID–STRING [32]
Reason–STRING [32]
Remote GW Port–TWO_BYTES
Call ID–EIGHT_BYTES
Conference ID–EIGHT_BYTES
PRIMARY The call ID was invalid or changed mid-call.
CAUSE
PRIMARY There is a software problem on the BTS 10200 or on an endpoint. Call Cisco TAC. (Contact Cisco
ACTION TAC.)
Note Refer to the
detailed instructions on contacting Cisco TAC and opening a service request.
OL-8723-19
10-142.
"Obtaining Documentation and Submitting a Service Request" section on page lvi
"Invalid Conference Identifier—Signaling
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
Signaling Events and Alarms
for
10-51