Table of Contents
Advertisement
Chapter 15
Diagnostic Tests
Channel-Associated Signaling Trunk Termination Tests
RESULT -> TEST-SUCCESS
REASON -> PASSED: Reason: AUEP-NACK received with RespCode = 510
TRUNK DIAGNOSTIC TEST EXECUTED -> diag trunk
TG-NUM -> 64
CIC -> 1
TEST-TYPE -> ADM-TERM-CONNECTION-TEST
TEST-DURATION -> 32
RESULT -> TEST-SUCCESS
REASON -> PASS successfully.
Reply: Diagnostic command executed.
Force the CAS trunk termination into INS state:
Step 4
control cas-trunk-termination tgn-id=64; mode=forced; target-state=ins;
Note
On some Cisco voice gateways ringback tone may be played when the subscriber line is idle. If the router
statement "voice call-sendalert" is added to the run file the ringback tone is not be played.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
15-12
OL-8723-19
Advertisement
Chapters
Table of Contents
Troubleshooting
