Database (20) - Cisco BTS 10200 Troubleshooting Manual

Database Events and Alarms

DATABASE (20)

To troubleshoot and correct the cause of the alarm, refer to the
Switchover—Database (20)" section on page
DESCRIPTION Replication Data Flush Timeout During Switchover
SEVERITY MAJOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Tables Failed–STRING [20]
PRIMARY An replication module software problem has occurred.
CAUSE
PRIMARY The database restore procedure needs to be executed on the side of the system which goes active after
ACTION the switchover. Any alarms should be cleared manually after the recovery action is taken.
DATABASE (21)
To troubleshoot and correct the cause of the alarm, refer to the
Exception—Database (21)" section on page
DESCRIPTION Database Statistics Collection Exception (DB Statistics Collection Exception)
SEVERITY MINOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Host Name–STRING [30]
Database Name–STRING [10]
Schema Name–STRING [32]
Object Name–STRING [64]
Task Name–STRING [64]
Exception–STRING [256]
PRIMARY Check the messages in the Exception dataword field to identify the cause of the error.
CAUSE
PRIMARY The correction action varies and is determined by the type of exception. For more information about
ACTION the ORA-xxxxx errors, execute the oerr ora xxxxx command as an Oracle user.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
6-16
"Replication Data Flush Timeout During
6-33.
"Database Statistics Collection
6-34.
Chapter 6 Database Troubleshooting
OL-8723-19