Callp (22) - Cisco BTS 10200 Troubleshooting Manual

Softswitch
Hide thumbs Also See for BTS 10200:
Table of Contents

Advertisement

Chapter 4
Call Processing Troubleshooting

CALLP (22)

To monitor and correct the cause of the event, refer to the
Processing (22)" section on page
DESCRIPTION
Trunk Group Index Read Failure
SEVERITY
WARNING
THRESHOLD
100
THROTTLE
0
DATAWORDS
Trunk Group Index–FOUR_BYTES
Call Index–FOUR_BYTES
PRIMARY
The Trunk Group Index could not be retrieved from call data.
CAUSE
PRIMARY
Check the provisioning.
ACTION
CALLP (23)
To monitor and correct the cause of the event, refer to the
Subscriber—Call Processing (23)" section on page
DESCRIPTION
Routing Error: Termination is Not a Subscriber
SEVERITY
WARNING
THRESHOLD
100
THROTTLE
0
DATAWORDS
Termination Index–FOUR_BYTES
Termination Type–FOUR_BYTES
PRIMARY
The destination termination is not provisioned as a subscriber.
CAUSE
PRIMARY
Check the provisioning.
ACTION
OL-8723-19
"Trunk Group Index Read Failure—Call
4-26.
"Routing Error: Termination is Not a
4-26.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
Call Processing Events and Alarms
4-11

Advertisement

Table of Contents
loading

Table of Contents