Signaling (108) - Cisco BTS 10200 Troubleshooting Manual

Chapter 10 Signaling Troubleshooting

SIGNALING (108)

To troubleshoot and correct the cause of the alarm, refer to the
Mode—Signaling (108)" section on page
DESCRIPTION Simplex Only Operational Mode
SEVERITY MAJOR
THRESHOLD 30
THROTTLE 0
DATAWORDS Host Domain Name–STRING [128]
PRIMARY The hostname parameter is specified in the platform.cfg file instead of -contact parameter.
CAUSE
PRIMARY The BTS 10200 is configured as a SIMPLEX system.
ACTION
SIGNALING (109)
To troubleshoot and correct the cause of the alarm, refer to the
Association Failure—Signaling (109)" section on page
DESCRIPTION Stream Control Transmission Protocol Association Failure (SCTP Association Failure)
SEVERITY MAJOR
THRESHOLD 100
THROTTLE 0
DATAWORDS SCTP Association ID–STRING [17]
PRIMARY The Ethernet cables for the signaling gateway process (SGP) are unplugged or severed.
CAUSE
PRIMARY Plug Ethernet cables in or fix the severed connection.
ACTION
SECONDARY SGP is not operational.
CAUSE
SECONDARY Check the SGP alarms to determine why it is not operating properly.
ACTION
OL-8723-19
"Simplex Only Operational
10-145.
"Stream Control Transmission Protocol
10-146.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
Signaling Events and Alarms
10-59