Maintenance (98) - Cisco BTS 10200 Troubleshooting Manual

Maintenance Events and Alarms

MAINTENANCE (98)

To troubleshoot and correct the cause of the alarm, refer to the
Queue Depth at 25% of Its Hi-Watermark—Maintenance (98)" section on page
DESCRIPTION Inter-Process Communication Input Queue Depth at 25% of Its Hi-Watermark (IPC Input Queue Depth
At 25% Of Its Hi-Watermark)
SEVERITY MINOR
THRESHOLD 500
THROTTLE 0
DATAWORDS Process Name–STRING [10]
Thread Type–TWO_BYTES
Thread Instance–TWO_BYTES
Hi Watermark–FOUR_BYTES
Lo Watermark–FOUR_BYTES
PRIMARY The indicated thread is not able to process its IPC input messages fast enough, hence the input queue
CAUSE has grown too large and is at 25% of the level at which it will enter the throttle state.
PRIMARY Contact Cisco TAC.
ACTION
Refer to the
Note
detailed instructions on contacting Cisco TAC and opening a service request.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
7-52
"Obtaining Documentation and Submitting a Service Request" section on page lvi
Chapter 7 Maintenance Troubleshooting
"Inter-Process Communication Input
7-108.
for
OL-8723-19