Database (5) - Cisco BTS 10200 Troubleshooting Manual

Database Events and Alarms

DATABASE (5)

To troubleshoot and correct the cause of the alarm, refer to the
HeartBeat Process Died—Database (5)" section on page
DESCRIPTION Element Management System Database HeartBeat Process Died (EMS DBHeartBeat Process Died)
SEVERITY CRITICAL
THRESHOLD 100
THROTTLE 0
DATAWORDS Host Name–STRING [30]
Database Name–STRING [10]
Time Stamp–STRING [20]
PRIMARY The DBHeartBeat process has been terminated by the system manager program (SMG) or stopped by
CAUSE the platform.
PRIMARY Restart the DBHeartBeat process by entering the dbinit -H -i start command as an Oracle user, or by
ACTION entering the platform start command as a root user.
DATABASE (6)
To troubleshoot and correct the cause of the alarm, refer to the
Replication DefTranDest Queue Overloaded—Database (6)" section on page
DESCRIPTION Element Management System Database Replication DefTranDest Queue Overloaded (EMS Database
Replication DefTranDest Queue Overloaded)
SEVERITY MAJOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Host Name–STRING [30]
Database Name–STRING [10]
Threshold–FOUR_BYTES
Time Stamp–STRING [20]
PRIMARY The replication PUSH job is broken.
CAUSE
PRIMARY Correct problems on the remote database.
ACTION
SECONDARY The remote database is not accessible.
CAUSE
SECONDARY Make sure that the DBHeartBeat process is up.
ACTION
TERNARY The database is overloaded.
CAUSE
TERNARY Troubleshoot the database performance.
ACTION
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
6-6
Chapter 6 Database Troubleshooting
"Element Management System Database
6-29.
"Element Management System Database
6-30.
OL-8723-19