Signaling (16) - Cisco BTS 10200 Troubleshooting Manual

Signaling Events and Alarms

SIGNALING (16)

To troubleshoot and correct the cause of the alarm, refer to the
section on page
DESCRIPTION Link is Congested
SEVERITY MINOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Link No–ONE_BYTE
PRIMARY Issued when the specified SS7 link is experiencing congestion.
CAUSE
PRIMARY Monitor event reports at the network level to determine if the traffic load on the specified SS7 link is
ACTION too high on the local end, or if the remote end is lagging in processing the traffic.
SECONDARY Verify that the SS7 link has not degraded in quality.
ACTION
TERNARY Verify that the traffic load has not become unbalanced if multiple SS7 links are used.
ACTION
SUBSEQUENT Verify that local SS7 signaling adapter process is running normally.
ACTION
SIGNALING (17)
To troubleshoot and correct the cause of the alarm, refer to the
Outage—Signaling (17)" section on page
DESCRIPTION Link: Local Processor Outage
SEVERITY MINOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Link No–ONE_BYTE
Link Name–STRING [8]
PRIMARY Issued when the specified SS7 link has experienced a processor outage.
CAUSE
PRIMARY Monitor the system for maintenance event reports associated with the signaling adapter or the
ACTION underlying platform instances that support the specified SS7 link. Verify that the process and or
platform are restarted and returned to service.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
10-10
10-134.
10-134.
Chapter 10 Signaling Troubleshooting
"Link is Congested—Signaling (16)"
"Link: Local Processor
OL-8723-19