Signaling (18) - Cisco BTS 10200 Troubleshooting Manual

Chapter 10 Signaling Troubleshooting

SIGNALING (18)

To troubleshoot and correct the cause of the alarm, refer to the
Outage—Signaling (18)" section on page
DESCRIPTION Link: Remote Processor Outage
SEVERITY MINOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Link No–ONE_BYTE
Link Name–STRING [8]
PRIMARY Issued when the specified SS7 link has experienced a processor outage.
CAUSE
PRIMARY Monitor the network level event reports for any events associated with the processing complex used
ACTION by the specified SS7 link. Verify that the SS7 link is returned to service.
SIGNALING (19)
To troubleshoot and correct the cause of the alarm, refer to the
section on page
DESCRIPTION Link Set Inaccessible
SEVERITY MAJOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Link Set No–ONE_BYTE
Link Set Name–STRING [8]
PRIMARY Issued when the specified SS7 link set is inaccessible.
CAUSE
PRIMARY If the SS7 signaling adapter is not running normally and the associated call agent platform is not active,
ACTION return them to service.
OL-8723-19
10-134.
10-134.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
Signaling Events and Alarms
"Link: Remote Processor
"Link Set Inaccessible—Signaling (19)"
10-11