Appendix; Troubleshooting And System Messages; Troubleshooting; System Messages - Cisco catalyst 6500 series Configuration Note

Troubleshooting and System Messages

This appendix describes how to troubleshoot the CSM and system messages you may receive.

Troubleshooting

When a CSM is out-of-service the module still replies to ARP requests but will not reply to pings.

System Messages

This section lists system log (syslog) messages supported in the CSM.
For the Cisco IOS, the message logs contain the warning level with this syntax:
CSM_SLB_ level-code
Table B-1
Table B-1
Message Level
LOG_EMERG
LOG_ALERT
LOG_CRIT
LOG_ERR
LOG_WARNING
LOG_NOTICE
LOG_INFO
LOG_DEBUG
Error Message CSM_SLB-3-IDB_ERROR Unknown error occurred while configuring IDB
OL-4612-01
lists he level codes:
Error Message Level Codes
The MFSC could not create the internal interfaces for the CSM.
Explanation
Either this version of the MFSC or the IDPROM were incorrectly programmed.
Recommended Action
Reprogram the MFSC or the IDPROM.
A P P E N D I X
Code
0 /* system is unusable */
1 /* action must be taken immediately */
2 /* critical conditions */
3 /* error conditions */
4 /* warning conditions */
5 /* normal but signification condition */
6 /* informational */
7 /* debug-level messages */
Catalyst 6500 Series Content Switching Module Configuration Note
B
B-1