Monitoring System Events - Cisco BTS 10200 Troubleshooting Manual

Chapter 12 System Troubleshooting

Monitoring System Events

This section provides the information needed to monitor and correct system events.
of the system events in numerical order and provides cross reference to each subsection in this section.
Table 12-2 BTS 10200 System Events
Event Type Event Name
SYSTEM(1) Test Report—System (1)
SYSTEM(2) Inter-Process Communication Queue Read Failure—System (2)
SYSTEM(3) Inter-Process Communication Message Allocate Failure—System (3)
SYSTEM(4) Inter-Process Communication Message Send Failure—System (4)
SYSTEM(5) Unexpected Inter-Process Communication Message Received—System (5)
SYSTEM(6) Index List Insert Error—System (6)
SYSTEM(7) Index List Remove Error—System (7)
SYSTEM(8) Thread Creation Failure—System (8)
SYSTEM(9) Timer Start Failure—System (9)
SYSTEM(10) Index Update Registration Error—System (10)
SYSTEM(11) Index Table Add-Entry Error—System (11)
SYSTEM(12) Software Error—System (12)
SYSTEM(13) Multiple Readers and Multiple Writers Maximum Q Depth Reached—System (13)
SYSTEM(14) Multiple Readers and Multiple Writers Queue Reached Low Queue Depth—System
(14)
SYSTEM (15) Multiple Readers and Multiple Writers Throttle Queue Depth Reached—System (15)
Test Report—System (1)
The Test Report event is for testing the system event category. The event is informational and no further
action is required.
Inter-Process Communication Queue Read Failure—System (2)
The Inter-Process Communication Queue Read Failure alarm (minor) indicates that the IPC queue read
has failed. To troubleshoot and correct the cause of the Inter-Process Communication Queue Read
Failure alarm, refer to the
page
Inter-Process Communication Message Allocate Failure—System (3)
The Inter-Process Communication Message Allocate Failure alarm (minor) indicates that the IPC
message allocation has failed. To troubleshoot and correct the cause of the Inter-Process Communication
Message Allocate Failure alarm, refer to the
Failure—System (3)" section on page
OL-8723-19
"Inter-Process Communication Queue Read Failure—System (2)" section on
12-14.
"Inter-Process Communication Message Allocate
12-15.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
Monitoring System Events
Table 12-2 lists all
Event Severity
INFO
MINOR
MINOR
MINOR
WARNING
MINOR
MINOR
MAJOR
WARNING
MINOR
MINOR
MAJOR
CRITICAL
MINOR
MAJOR
12-11