Cisco BTS 10200 Troubleshooting Manual page 595

Softswitch
Hide thumbs Also See for BTS 10200:
Table of Contents

Advertisement

Chapter 14
General Troubleshooting
Subsystem Congestion
Layer
Version
Location
Cause
Solution
Subsystem Failure
Layer
Version
Location
Cause
Solution
Unequipped User
Layer
Version
Location
Cause
Solution
Network Failure
Layer
Version
Location
Cause
Solution
OL-8723-19
SCCP Subsystem (TCAP)
ITU88, ITU92, ITU96, ANSI88, ANSI92
Service control point (SCP)
The SCP subsystem is congested.
Ask the SCP Service Provider to solve the congestion problem
SCCP Subsystem (TCAP)
ITU88, ITU92, ITU96, ANSI88, ANSI92
SCP
The SCP is down or the subsystem of the SCP is down.
Verify that the SCP point code is correct.
SCCP Subsystem (TCAP)
ITU88, ITU92, ITU96, ANSI88, ANSI92
SCP
The SCCP user is not equipped
Verify that the SCP point code is correct
MTP3/MTP2/MTP1 or SCTP
ITU88, ITU92, ITU96, ANSI88, ANSI92 for NTP3/2/1, Internet Engineering Task
Force (IETF) RFC 2960 for SCTP
Local, STP, or SCP
The Broadband Telephony Softswitch (BTS)-ITP sctp-association is down or the SS7
link, linkset, or route is down.
See
Chapter 13, "Network Troubleshooting,"
problem.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
Protocol Troubleshooting
section assistance in solving this
14-21

Advertisement

Table of Contents
loading

Table of Contents