Table of Contents
Advertisement
Contents
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
x
CALLP (31)
4-15
4-16
CALLP (33)
4-16
4-17
CALLP (35)
4-17
4-18
CALLP (37)
4-18
4-19
CALLP (39)
4-19
4-20
CALLP (41)
4-20
4-21
CALLP (43)
4-21
4-22
CALLP (45)
4-22
Test Report-Call Processing (1)
No Route Available for Called Number-Call Processing (8)
No Route Available for Carrier Dialed-Call Processing (9)
Feature Server One Link Down-Call Processing (11)
Feature Server Both Links Down-Call Processing (12)
Network Access Server Create Connection Error-Call Processing (13)
Network Access Server Authentication Failure-Call Processing (14)
Cable Modem Termination System Easily Recognizable Identification Not Found in Media Gateway
Table-Call Processing (15)
Route Index has No Trunk Group Assigned-Call Processing (16)
Invalid Route Index Used-Call Processing (17)
Unable to Play Announcement-Call Processing (18)
Call Routed to Unprovisioned Subscriber-Call Processing (19)
No Route or Trunk Group Available to Route Call-Call Processing (20)
Call Released Due to Maximum Hop Counts Exceeded-Call Processing (21)
Trunk Group Index Read Failure-Call Processing (22)
Routing Error: Termination is Not a Subscriber-Call Processing (23)
Invalid Route for Subscriber Index-Call Processing (24)
Invalid Route Group for Subscriber Routing-Call Processing (25)
Invalid Trunk Group for Subscriber Routing-Call Processing (26)
Unable to Route: Blocked by Destination Subscriber Status-Call Processing (27)
Route Name Does Not Exist-Call Processing (28)
Routing Selection Failure-Call Processing (29)
Customer-Originated Trace Test Failed-Call Processing (30)
4-23
4-24
4-25
4-25
4-25
4-25
4-26
4-26
4-27
4-27
4-24
4-24
4-25
4-25
4-25
4-26
4-26
4-26
4-26
4-27
4-27
4-27
4-27
4-28
OL-8723-19
Advertisement
Chapters
Table of Contents
Troubleshooting
