Chapter 12 System Troubleshooting - Cisco BTS 10200 Troubleshooting Manual

System Events and Alarms
SYSTEM (1)
For additional information, refer to the
DESCRIPTION Test Report
SEVERITY Information (INFO)
THRESHOLD 100
THROTTLE 0
PRIMARY This is a test report for the SYSTEM category.
CAUSE
PRIMARY No action is required.
ACTION
SYSTEM (2)
To troubleshoot and correct the cause of the alarm, refer to the
Read Failure—System (2)" section on page
DESCRIPTION Inter-Process Communication Queue Read Failure (IPC Queue Read Failure)
SEVERITY MINOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Queue Name–STRING [20]
Location Tag–STRING [30]
PRIMARY There is a problem with the inter-process communication (IPC) process.
CAUSE
PRIMARY If the problem persists, call Cisco Technical Assistance Center (TAC). (Contact Cisco TAC.)
ACTION
Refer to the
Note
detailed instructions on contacting Cisco TAC and opening a service request.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
12-2
"Obtaining Documentation and Submitting a Service Request" section on page lvi
"Test Report—System (1)" section on page
"Inter-Process Communication Queue
12-14.
Chapter 12 System Troubleshooting
12-11.
for
OL-8723-19