Callp (38) - Cisco BTS 10200 Troubleshooting Manual

Chapter 4 Call Processing Troubleshooting

CALLP (38)

To troubleshoot and correct the cause of the alarm, refer to the
Error Received—Call Processing (38)" section on page
DESCRIPTION Release Cause 25 Exchange Routing Error Received
SEVERITY MINOR
THRESHOLD 100
THROTTLE 0
DATAWORDS CIC–FOUR_BYTES
TGN-ID–FOUR_BYTES
DPC–STRING [64]
OPC–STRING [64]
PRIMARY Received release (REL) with cause number 25.
CAUSE
PRIMARY Log and map the cause to number 31.
ACTION
CALLP (39)
To monitor and correct the cause of the event, refer to the
Isolation—Call Processing (39)" section on page
DESCRIPTION Test Call Blocked Due to Congestion or Isolation
SEVERITY WARNING
THRESHOLD 100
THROTTLE 0
DATAWORDS CIC- TWO_BYTES
TGN-ID–EIGHT_BYTES
DPC–STRING [20]
OPC–STRING [20]
PRIMARY The initial address message (IAM) for test call was blocked due to congestion or isolation.
CAUSE
PRIMARY Correct the congestion or isolation problem and place the test call again from a remote system.
ACTION
OL-8723-19
"Release Cause 25 Exchange Routing
4-36.
"Test Call Blocked Due to Congestion or
4-29.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
Call Processing Events and Alarms
4-19