Maintenance (36) - Cisco BTS 10200 Troubleshooting Manual

Maintenance Events and Alarms

MAINTENANCE (36)

For additional information, refer to the
Complete to Process—Maintenance (36)" section on page
DESCRIPTION Process Manager: Sending All Processes Init Complete to Process (PMG: Sending All Processes Init
Complete to Process)
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS Process Name–STRING [40]
Process Group–ONE_BYTE
PRIMARY The system is being brought up, and all processes are being notified to start executing.
CAUSE
PRIMARY No action is necessary.
ACTION
MAINTENANCE (37)
For additional information, refer to the
on page
DESCRIPTION Process Manager: Killing Process (PMG: Killing Process)
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS Process Name–STRING [40]
Process Group–ONE_BYTE
PRIMARY One of the following software problems occurred while the system was being brought up or shut down.
CAUSE
PRIMARY No action is necessary.
ACTION
SECONDARY A process did not come up when the system was brought up and had to be killed in order to restart it.
CAUSE
TERNARY A process did not exit when asked to exit.
CAUSE
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
7-22
7-75.
"Process Manager: Sending All Processes Initialization
7-75.
"Process Manager: Killing Process—Maintenance (37)" section
Chapter 7 Maintenance Troubleshooting
OL-8723-19