Invalid Route For Subscriber Index—Call Processing (24) - Cisco BTS 10200 Troubleshooting Manual

Chapter 4 Call Processing Troubleshooting
Invalid Route for Subscriber Index—Call Processing (24)
The Invalid Route for Subscriber Index event functions as a warning that an invalid route was selected
for the subscriber index. The primary cause of the event is that the route is not provisioned correctly for
the specified subscriber. To correct the primary cause of the event, check and correct the BTS 10200
subscriber index provisioning.
Invalid Route Group for Subscriber Routing—Call Processing (25)
The Invalid Route Group for Subscriber Routing event functions as a warning that an invalid route group
for the subscriber routing was selected. The primary cause of the event is that the route group is not
provisioned correctly for the specified subscriber. To correct the primary cause of the event, check and
correct the BTS 10200 route group provisioning.
Invalid Trunk Group for Subscriber Routing—Call Processing (26)
The Invalid Trunk Group for Subscriber Routing event functions as a warning that an invalid trunk group
for the subscriber routing was selected. The primary cause of the event is that the trunk group is not
provisioned correctly for the specified subscriber. To correct the primary cause of the event, check and
correct the BTS 10200 trunk group provisioning.
Unable to Route: Blocked by Destination Subscriber Status—Call Processing
(27)
The Unable to Route: Blocked by Destination Subscriber Status event functions as a warning that a call
route was blocked by the destination subscriber status. The primary cause of the event is that the
subscriber is not in the correct state. To correct the primary cause of the event, check and correct the
BTS 10200 subscriber state provisioning.
Route Name Does Not Exist—Call Processing (28)
The Route Name Does Not Exist event functions as a warning that the requested route name does not
exist. The primary cause of the event is that the route is not provisioned correctly. To correct the primary
cause of the event, check and correct the BTS 10200 route provisioning.
Routing Selection Failure—Call Processing (29)
The Routing Selection Failure event functions as a warning that the routing selection failed. The primary
cause of the event is that the route is not provisioned correctly. To correct the primary cause of the event,
check and correct the BTS 10200 route provisioning.
OL-8723-19
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
Monitoring Call Processing Events
4-27