Signaling (43) - Cisco BTS 10200 Troubleshooting Manual

Signaling Events and Alarms

SIGNALING (43)

For additional information, refer to the
Message on the Specified Circuit Identification Code—Signaling (43)" section on page
DESCRIPTION Release Complete Received in Response to Reset Circuit Message on the Specified Circuit
Identification Code (RLC Received in Response to RSC Message on the Specified CIC)
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS CIC Number–TWO_BYTES
TGN-ID–FOUR_BYTES
DPC–STRING [20]
OPC–STRING [20]
PRIMARY Issued when a release complete (RLC) message was received in response to a RSC message on the
CAUSE specified CIC.
PRIMARY No action required.
ACTION
SIGNALING (44)
For additional information, refer to the
Identification Code—Signaling (44)" section on page
DESCRIPTION Continuity Recheck is Performed on Specified Circuit Identification Code (Continuity Recheck is
Performed on Specified CIC)
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS CIC Number–TWO_BYTES
TGN-ID–FOUR_BYTES
DPC–STRING [20]
OPC–STRING [20]
PRIMARY Issued when a continuity recheck was performed on the specified CIC.
CAUSE
PRIMARY No action required.
ACTION
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
10-26
"Release Complete Received in Response to Reset Circuit
"Continuity Recheck is Performed on Specified Circuit
10-104.
Chapter 10 Signaling Troubleshooting
10-103.
OL-8723-19