Audit (10) - Cisco BTS 10200 Troubleshooting Manual

Audit Events and Alarms

AUDIT (10)

For additional information, refer to the
DESCRIPTION Call Data Audit Complete
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS Audit Information–STRING [256]
PRIMARY A memory audit has been completed.
CAUSE
PRIMARY Check if any call blocks are freed as a result of the audit. An investigation to determine the root cause
ACTION may be useful.
AUDIT (11)
To troubleshoot and correct the cause of the alarm, refer to the
Failure—Audit (11)" section on page
DESCRIPTION Critical Network Time Protocol Service Failure (Critical NTP Service Failure)
SEVERITY CRITICAL
THRESHOLD 100
THROTTLE 0
DATAWORDS Failure Details–STRING [220]
Probable Causes–STRING [80]
Corrective Actions–STRING [80]
PRIMARY See the data field.
CAUSE
PRIMARY See the data field.
ACTION
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
2-6
"Call Data Audit Complete—Audit (10)" section on page
"Critical Network Time Protocol Service
2-24.
Chapter 2 Audit Troubleshooting
2-19.
OL-8723-19