Script Arguments - Cisco BTS 10200 Troubleshooting Manual

Pre-Manual Switchover Switch Integrity Diagnostic Utility

Script Arguments

The Cisco BTS 10200 Softswitch Pre-Manual Switchover Switch Integrity Diagnostic Utility script will
uses an optional argument for specifying the switchover target. Possible argument values are: CA,
FSPTC, and FSAIN. The usage of this optional argument is the same as that for the presw-diag CLI
command target field.
Script Output
The Cisco BTS 10200 Softswitch Pre-Manual Switchover Switch Integrity Diagnostic Utility script
displays the resulting summary on the screen and also stores detailed information in a log file.
Log File
The script output log file:
•
•
•
Result Summary
The script utility uses the following format for the result summary. The summary is displayed on the
screen and is stored in the log file.
Legend for the possible values:
•
Switchover target status OK = boolean
EMS and CA DB in sync = boolean
EMS-A and EMS-B DB in sync = boolean
CA shared memory integrity OK = boolean
System time in sync = boolean
No switchover impact alarms = boolean
Process configuration OK = boolean
Inter-node communication OK = boolean
No issues in OS messages file = boolean
BTS software configuration OK = boolean
Log file = [logFileName]
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
15-112
Contains a timestamp so that its name is unique
Is stored in the /opt/ems/log directory on the node that the script utility is running from
Is managed by the Cisco BTS 10200 Softswitch log archiving utility
boolean: either "Y" or "N"
Chapter 15 Diagnostic Tests
OL-8723-19