Clear Lisp Proxy-Itr Lsp-16 - Cisco Nexus 7000 Series Command Reference Manual

clear lisp proxy-itr
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
clear lisp proxy-itr
To clear the list of Proxy-ITR (PITR) locators that have been discovered through Map-Requests, use the
clear lisp proxy-itr command.
Syntax Description locator
vrf vrf-name
None
Defaults
Global configuration mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3.lisp-80)
When an xTR receives a Map-Request from a PITR for an endpoint identifier to Routing Locator
Usage Guidelines
(EID-to-RLOC) mapping resolution, the locator address of the PITR is saved (separately from the map
cache) by an xTR there is a need to send Solicit-Map-Requests (SMRs) to other LISP devices, including
PITRs. The number of locators currently cached is eight (8).
The clear lisp proxy-itr command removes all of the PITR locators that have been discovered through
Map-Requests. When the locator form is used, only this PITR locator entry is removed. When you enter
the vrf keyword, all PITR locators that are associated with this VRF are removed
This command does not require a license.
This example shows how to clear the list of PITR locators that have been discovered through
Examples
Map-Requests:
switch# clear lisp proxy-itr
Related Commands Command
show lisp proxy-tir
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-16
clear lisp proxy-itr [locator] [vrf vrf-name]
(Optional) IPv4 or IPv6 locator address of the PITR to clear.
(Optional) Specifies virtual routing and forwarding (VRF) with which to clear
locator address of the PITR.
Modification
This command was introduced.
Description
Displays a list of PITRs discovered through Map-Requests.
Cisco Nexus 7000 Series LISP Commands