Powering up and Startup
5.2 STARTUP
The startup is explained in a very simple way, using the programming features with the existing
parameter groups in the menus STARTUP and BASIC.
5.2.1 STARTUP Menu
5.2.1.1 V/f Control Type (P0202 = 0)
Step
Indication on the Display/Action
1
Monitoring mode
Press the key ENTER/MENU to enter 1
level of programming mode
3
When the STARTUP group is selected
Press the key ENTER/MENU
5
Change the parameter P0317 to "1 - Yes",
by using the
7
When the desired value is reached, press
ENTER/MENU to save the modification
Press the key
9
If necessary, modify the content of "P0402
- Motor Rated Speed"
Press the key
32 | CFW500
st
key
for the next parameter
for the next parameter
Step
Indication on the Display/Action
2
The PARAM group is selected, press
the keys
or
STARTUP group
4
The parameter "P0317 - Oriented Start-
Up" is then selected, press the ENTER/
MENU to get into the parameter content
6
If necessary, press ENTER/MENU to
modify the content of "P0202 - Control
Type" for P0202 = 0 (V/f)
8
If necessary, modify the content of "P0401
- Motor Rated Current"
Press the key
10
If necessary, modify the content of "P0403
- Motor Rated Frequency"
Press the key
until selecting the
for the next parameter
for the next parameter