Installation Of The Inverter With Nema1 Kit (Option, Cfw11; Access To The Control And Power Terminal Strips; Installation Of The Inverter With Nema1 Kit (Option, Cfw11....T...on1...) On A Wall - Frame Size E - WEG CFW-11 Series User Manual

3.1.5 Installation of the Inverter with Nema1 Kit (Option, CFW11....T...ON1...) on a Wall -
Frame Size E
Fixing holes position and diameter according to the
External dimensions of the inverter with Nema1 kit according to
Fasten the inverter.
Install the Nema1 kit on the inverter as shown in
with the product.

3.1.6 Access to the Control and Power Terminal Strips

Frame Sizes B and C:
It is necessary to remove the keypad and the front cover in order to get access to the control and power terminal
strips.
1
Figure 3.9 - Removal of keypad and front cover - frame sizes B and C
Figure 3.8 - Installation of the Nema1 kit in frame size E model
Installation and Connection
Figure 3.2 on page 3-4
Section 8.6 NEMA 1 KITs on page
Figure 3.8 on page 3-11 using the two M8 screws supplied
2
for frame size E models.
8-16.
3
CFW-11 | 3-11
3