Reading Out Sorting Judgment Result - Agilent Technologies 4288A Programming Manual

Sorting Based on Measured Result (Comparator Function)

Reading Out Sorting Judgment Result

Reading Out Sorting Judgment Result
You can read out the sorting judgment result (readout value) along with the measured result
by the comparator function according to the correspondences in Figure 7-1. To do this, use
the following commands.
•
•
•
The comparator sorting result is read out as an integer between 0 and 11, as shown in the
table below.
Table 7-2 Relationship between comparator sorting result and readout value
To display the comparator sorting result in the left side of the instrument setup display area,
use the following command to select the comparator sorting result display page (page
number: 6).
•
86
*TRG on page 128
:FETC? on page 181
:READ? on page 186
Readout value
0 OUT_OF_BINS
1 BIN1
2 BIN2
3 BIN3
4 BIN4
5 BIN5
6 BIN6
7 BIN7
8 BIN8
9 BIN9
10 AUX_BIN
11 Cannot be sorted (an overload is detected).
:DISP:TEXT2:PAGE on page 179
Comparator sorting result
Chapter 7