Change 1
The firmware revision 1.00 does not support the following function and command. Please
delete their descriptions in this manual.
•
External test
:SYST:TEST? command on page 194
•
Change 2
The firmware revisions 1.00 and 1.10 do not support the following functions and
commands. Please delete their descriptions in this manual.
•
Displaying compensation data in the instrument setup display area
•
Selecting parameter format of OPEN/SHORT compensation data
:CORR:CKIT:STAN1:FORM command on page 154
•
:CORR:CKIT:STAN2:FORM command on page 154
•
Appendix A
Manual Changes
Manual Changes
209