At-A-Glance List Of Gpib Command Correspondence - Agilent Technologies 4288A Programming Manual

Information for Replacing 4278A with 4288A

At-a-Glance List of GPIB Command Correspondence

At-a-Glance List of GPIB Command Correspondence
Table B-25 (alphabetical order of 4278A commands) and Table B-26 (by function of
4278A commands) provide at-a-glance lists of the GPIB command correspondence
between the 4278A and the 4288A. For details on the command correspondence, refer to
"Functional Comparison and GPIB Command Correspondence" on page 212.
Table B-25 At-a-glance list of GPIB command correspondence between 4278A and 4288A
(alphabetical order)
4278A
AOFF{0|1}
Turns ON/OFF the offset compensation for the primary parameter.
AUX{0|1}
Turns ON/OFF the AUX BIN function.
AVE=
Sets the averaging count.
BIN{1-9}=
Sets the limit range of each BIN in the tolerance mode.
BLIM=
Sets the limit range in the sequential mode.
BOFF{0|1} Turns ON/OFF the offset compensation for the secondary parameter.
CABL{0-2}
Sets the cable length.
CCOU? Reads out the BIN count value of each channel.
CLIM
Clears all limit ranges.
CNO= Sets the channels for multi-compensation.
CNT{0|1}
Turns ON/OFF the BIN count function.
COMP{0|1}
Turns ON/OFF the comparator function.
COUN?
Reads out the BIN count value.
CREJ0
Turns OFF the Low C reject function.
CREJ{1-6}
Sets the Low C detection boundary value for the Low C reject function.
CSTD=
Sets the Cp value of the standard for the standard (LOAD) compensation.
DATA? Reads out the measurement result.
DBIN{0|1} Turns ON/OFF the simultaneous output of the comparator sorting result
when reading out the measurement result.
DDIG{4-6} Sets the number of display digits for the measurement result.
DEND Turns OFF the continuous data output (spew-out mode).
DFMT{1|2} Sets the data output (data transfer) format.
DPAG{1-4} Sets the display format on the display.
DST Turns ON the continuous data output (spew-out mode).
238
Function overview
[ A ]
[ B ]
[ C ]
[ D ]
4288A
:CORR:OFFS on page 163
:CALC:COMP:AUXB on page 135
:AVER:COUN on page 132
:CALC:COMP:PRIM:BIN{1-9} on page 142
:CORR:OFFS on page 163
:CAL:CABL on page 133
:CALC:COMP:COUN:MULT:DATA? on
page 139
:CALC:COMP:COUN:MULT:OVLD? on
page 140
:CALC:COMP:CLE on page 136
:CORR:MULT:CHAN on page 161
:CALC:COMP:COUN on page 137
:CALC:COMP on page 134
:CALC:COMP:COUN:DATA? on page 138
:CALC:COMP:COUN:OVLD? on page 140
:CREJ on page 166
:CREJ:LIM on page 167
:CORR:CKIT:STAN3 on page 155
:FETC? on page 181
N/A (dependent on the ON/OFF of the
comparator function)
:DISP:TEXT1:DIG on page 176
N/A
:FORM on page 182
N/A
N/A
Appendix B