Table of Contents
Advertisement
Viewing Result Details
1 After completing a test, press the Save button. The Save Results
screen displays.
2 If the cable ID in the display is wrong, press the backspace arrow to
erase it, and press the keyboard keys to enter the correct cable ID.
For a cable ID with multiple fields, press Shift, then Tab to back up
to a prior field, or use your stylus or finger to get to the desired field.
An unshifted Tab will move the cursor forward one field.
3 When the label is correct, press the Save button. The WireScope
saves the results of the test to the chosen storage site. If you have a
multiple-field cable ID, there must be a value in every field, including
before the first yellow dot and after the last yellow dot.
A Details button on Pass and Fail screens opens the Test Data screen.
Th‰vtÃUr†‡ÃSr†ˆy‡†
WvrvtÃSr†ˆy‡Ã9r‡hvy†
5−5
Advertisement
Table of Contents
