Calc1:Math:expr:name - Agilent Technologies 4288A Programming Manual

Command Reference

:CALC1:MATH:EXPR:NAME

:CALC1:MATH:EXPR:NAME
Syntax
:CALCulate1:MATH:EXPRession:NAME {DEV|PCNT}
:CALCulate1:MATH:EXPRession:NAME?
Description Specifies the expression of the primary parameter used when displaying the measurement
result in the deviation measurement mode.
Parameters
Query response {DEV|PCNT}<newline><^END>
Related commands :CALC1:MATH:STAT on page 149
:CALC2:MATH:EXPR:NAME on page 151
:DATA {REF1|REF2} on page 172
Equivalent key
[∆ Mode]
sequence
148
DEV Displays the result in the difference between the measurement
(initial value)
value and the reference value
value).
PCNT Displays the difference between the measurement value and the
reference value
*1.Use the :DATA {REF1|REF2} command to set the reference value.
*2.(Measurement value - reference value) / reference value× 100
( [Blue] - [Meas Prmtr]
Description
*1
(measurement value - reference
*1 *2
in a percentage
) - Pri
to the reference value.
Chapter 10