Data:feed - Agilent Technologies 4288A Programming Manual

:DATA:FEED

Syntax :DATA:FEED {BUF1|BUF2},{"CALCulate1"|"CALCulate2"|""}
:DATA:FEED? {BUF1|BUF2}
Description Selects the measurement data fed into data buffer 1 or data buffer 2 from the following:
primary parameter, secondary parameter, or none to be fed. The query response is a string
with double quotation marks (").
Parameters
BUF1
BUF2
"CALCulate1"
"CALCulate2"
"" (initial value)
Query response
{"CALCulate1"|"CALCulate2"|""}<newline><^END>
Related commands :DATA:FEED:CONT on page 174
:DATA:POIN on page 175
Equivalent key No equivalent key is available on the front panel.
sequence
Chapter 10
Description
Specifies data buffer 1, to which the
{"CALCulate1"|"CALCulate2"|""} setting is applied or reads
out the setup of data buffer 1.
Specifies data buffer 2, to which the
{"CALCulate1"|"CALCulate2"|""} setting is applied. Or reads
out the setup of data buffer 2.
Description
Specifies the primary parameter as the measurement data fed into
the data buffer specified with {BUF1|BUF2}.
Specifies the secondary parameter as the measurement data fed
into the data buffer specified with {BUF1|BUF2}.
Does not feed the measurement data into the data buffer specified
with {BUF1|BUF2}.
Command Reference
:DATA:FEED
173