Agilent Technologies 4288A Programming Manual page 15

Chapter 10 "Command Reference"
This chapter provides the GPIB command reference for the Agilent 4288A. Each
command is fully described and ordered alphabetically based on its abbreviated name
format. Use the index to look up a GPIB command by its full syntax. To find a
command according to its function, refer to the "GPIB Command Table" on page 197.
Appendix A "Manual Changes"
This appendix contains the information required to adapt this manual to earlier
versions or configurations of the Agilent 4288A than that indicated by the current
printing date of this manual. The information in this manual applies directly to the
4288A model that has the serial number prefix listed on the title page of this manual.
Appendix B "Information for Replacing 4278A with 4288A"
This appendix describes information that is applicable when replacing the Agilent
4278A with the Agilent 4288A. See the 4278A Operation Manual for more detailed
information on the 4278A. See the 4288A Operation Manual and the other chapters of
this manual (Programming Manual) for more detailed information on the 4288A.
Appendix C "Status Reporting System"
This appendix describes the status reporting system of the Agilent 4288A.
Appendix D "Initial Settings"
This appendix provides initial settings, settings that can be saved/recalled, and settings
that can be backed up.
Appendix E "At-a-glance Table of Operations When Overload or Low C is Detected"
This appendix describes display output, GPIB output, and handler interface output
when an overload or Low C is detected.
Appendix F "Error Messages"
The Agilent 4288A provides error messages to indicate its operating status. This
appendix describes the error messages of the 4288A in order of error number. To
search for error messages alphabetically, refer to the Operation Manual.
Appendix G "4268A vs. 4288A GPIB Command Correspondence Table"
This appendix gives the correspondence between the Agilent 4268A GPIB commands
and those of the Agilent 4288A.
Chapter 1
Making Effective Use of This Manual
Contents of This Manual
13