Calc:comp:coun; Calc:comp:coun:cle - Agilent Technologies 4288A Programming Manual

:CALC:COMP:COUN

Syntax :CALCulate:COMParator:COUNt[:STATe] {ON|OFF|1|0}
:CALCulate:COMParator:COUNt[:STATe]?
Description Turns ON/OFF the BIN counter function of the comparator function.
If you turn on this function, the number of DUTs sorted into each BIN based on the
comparator sorting result is counted. The maximum count is 999999. If this is exceeded,
the count value will not be updated but remain at 999999.
Parameters
ON or 1
OFF or 0 (initial value)
Query response {1|0}<newline><^END>
Related commands :CALC:COMP:COUN:CLE on page 137
:CALC:COMP:COUN:DATA? on page 138
:CALC:COMP:COUN:OVLD? on page 140
:CALC:COMP:COUN:MULT:DATA? on page 139
:CALC:COMP:COUN:MULT:OVLD? on page 140
Equivalent key
[Comprtr]
sequence

:CALC:COMP:COUN:CLE

Syntax :CALCulate:COMParator:COUNt:CLEar
Description
Clears the count value of each BIN (resets it to 0) for the BIN counter function of the
comparator function.
Equivalent key
[Comprtr]
sequence
Chapter 10
Turns ON the BIN counter function.
Turns OFF the BIN counter function.
( [Blue] - [1] ) - Count
( - ) - -
[Blue] [1] Count CountClear
Command Reference
:CALC:COMP:COUN
Description
-
Yes
137