Initial Settings, Settings That Can Be Saved/Recalled, Settings That Can Be Backed Up - Agilent Technologies 4288A Programming Manual

Initial Settings
Initial Settings, Settings that can be Saved/Recalled, Settings that can be
Backed Up
Initial Settings, Settings that can be Saved/Recalled, Settings
that can be Backed Up
The columns of Table D-1 show the following items.
• Initial settings (factory settings)
• Settings reset from the front panel or the GPIB by the :SYST:PRES command on
page 193
• Settings reset from the GPIB by the *RST command on page 126
• Settings that can be saved/recalled
Table D-1 uses the following symbols.
l: Settings that can be saved/recalled
´: Settings that cannot be saved/recalled
• Settings that can be backed up
Table D-1 uses the following symbols.
m: Settings that can be backed up in the back-up memory (maximum 72 hours)
l: Settings that can be backed up in the EEPROM
´: Settings that cannot be backed up
The symbol "¬" in Table D-1 indicates that the value is the same as that indicated to the
left.
258 Appendix D