Agilent Technologies 4288A Programming Manual page 182

Command Reference
:DISP:TEXT2:PAGE
Parameters
If the specified parameter is out of the allowable setup range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
MAX or MIN can be used to specify the parameters.
Query response {numeric}<newline><^END>
Equivalent key
[Show Setting]
sequence
180
Page
number
25 OPEN compensation data (primary parameter)
26 OPEN compensation data (secondary parameter)
27 SHORT compensation data (primary parameter)
28 SHORT compensation data (secondary parameter)
29 LOAD compensation data (primary parameter)
30 LOAD compensation data (secondary parameter)
31 LOAD compensation standard definition value (primary parameter)
32 LOAD compensation standard definition value (secondary parameter)
33 OFFSET compensation data (primary parameter)
34 OFFSET compensation data (secondary parameter)
Description Page number
Range 1 to 34
Initial value 1
Resolution 1
[↑ → ]
and
Description of displayed item
<numeric>
[← ↓ ]
/
Chapter 10