Corr:offs - Agilent Technologies 4288A Programming Manual

:CORR:OFFS

Syntax [:SENSe]:CORRection:OFFSet[:STATe] {ON|OFF|1|0}
[:SENSe]:CORRection:OFFSet[:STATe]?
Description Turns ON/OFF the offset compensation function.
NOTE Changing this parameter will automatically turn off this function. To avoid this, you have
to write a program so that this command is executed after the execution of the
measurement parameter setup command (:CALC1:FORM and :CALC2:FORM).
Parameters
ON or 1
OFF or 0 (initial value)
Query response
{1|0}<newline><^END>
Related commands :CORR:OFFS:DATA on page 164
:CALC1:FORM on page 147
:CALC2:FORM on page 150
Equivalent key
[Offset]
sequence
Chapter 10
Turns ON the offset compensation function.
Turns OFF the offset compensation function.
( [Blue] - [3] ) - On/Off
Command Reference
:CORR:OFFS
Description
163