Calc1:Math:stat - Agilent Technologies 4288A Programming Manual

:CALC1:MATH:STAT

Syntax :CALCulate1:MATH:STATe {ON|OFF|1|0}
:CALCulate1:MATH:STATe?
Description Determines whether to use the function (deviation measurement mode) that displays the
primary parameter measurement result in deviation from the reference value (set using the
:DATA command).
NOTE
Changing any of the measurement parameters will automatically disable this function. To
avoid this, you have to write a program so that this command is executed after the
execution of the measurement parameter setup command (:CALC1:FORM and
:CALC2:FORM).
Parameters
ON or 1
OFF or 0 (initial value)
Query response {1|0}<newline><^END>
Related commands :CALC1:MATH:EXPR:NAME on page 148
:CALC1:FORM on page 147
:CALC2:FORM on page 150
:CALC2:MATH:STAT on page 152
Equivalent key
[∆ Mode]
sequence
Chapter 10
Enables the deviation measurement mode.
Disables the deviation measurement mode (in other
words, displays the measurement result in an absolute
value).
( - ) -
[Blue] [Meas Prmtr] Pri
Command Reference
:CALC1:MATH:STAT
Description
149