Disp:text1:Fmsd:data - Agilent Technologies 4288A Programming Manual

Command Reference

:DISP:TEXT1:FMSD:DATA

:DISP:TEXT1:FMSD:DATA
Syntax
:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA <numeric 1>,<numeric 2>
:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA?
Description Sets the value of the highest digit when displaying both the primary and secondary
parameters in the fixed point display. The parameter is always fixed to the same value,
regardless of this setting, if the following conditions are met:
•
•
Parameters
If one of the settable values is not specified for the parameter, the minimum possible value,
which is larger than the specified parameter value, is set. If the specified parameter exceeds
the maximum value, the maximum value is set.
MAX or MIN can be used to specify the parameters.
Query response {numeric 1},{numeric 2}<newline><^END>
Related commands :DISP:TEXT1:FMSD on page 177
:CALC1:MATH:EXPR:NAME on page 148
:CALC1:MATH:STAT on page 149
:CALC2:MATH:EXPR:NAME on page 151
:CALC2:MATH:STAT on page 152
Equivalent key
[Disp Mode]
sequence
178
Deviation is displayed as a percentage in the deviation measurement mode.
The resulting D and Q of the secondary parameter is displayed.
Description The value of the highest digit of
the primary parameter.
Range 1E-12, 10E-12, 100E-12,
1E-9, 10E-9, 100E-9,
1E-6, 10E-6, 100E-6
(only the 9 points listed above)
Initial value 1E-9
( -
[Blue] [Freq]
<numeric 1>
) - -
FixMsd MsdEnt
<numeric 2>
The value of the highest digit of
the secondary parameter.
1E-6, 10E-6, 100E-6,
1E-3, 10E-3, 100E-3,
1, 10, 100,
1E3, 10E3, 100E3,
1E6, 10E6, 100E6
(only the 15 points listed above)
1
Chapter 10