Trigger/Delay (Trigger Delay) Time - Agilent Technologies 4288A Programming Manual

Trigger/delay (trigger delay) time

Functional comparison
Delay time (trigger
Differences in usage of GPIB commands
Operation of *TRG
GPIB command correspondence
Table B-7 Correspondence of trigger mode/delay time setup commands
Generating a trigger and reading out the
Appendix B
Functional Comparison and GPIB Command Correspondence
Trigger mode
Allowable setup
range
delay time)
Resolution
*1.For the 4278A, no discrimination needs to be made between the EXT mode and the
BUS mode. On the other hand, for the 4288A, you must specify the EXT mode when
supplying a trigger from an external trigger terminal or handler interface or the BUS
mode when supplying a trigger through GPIB.
Generates a trigger when the trigger mode
is EXT.
command
Function
Generating a trigger
measurement result
INT
EXT
Trigger mode
BUS
MAN
Delay time (trigger delay time)
Information for Replacing 4278A with 4288A
4278A
INT, EXT, MAN
0.001 to 1
0.001
4278A
Generates a trigger and reads out the
measurement result after the completion of
measurement when the trigger mode is
BUS.
GPIB command
4278A
*TRG
Similar function is performed
by executing *TRG during
continuous data output (after
execution of DST).
TRIG1
TRIG2
TRIG3
DTIM=
4288A
*1
INT, EXT, BUS , MAN
0.001 to 1
0.001
4288A
4288A
:TRIG
*TRG
:TRIG:SOUR INT
:TRIG:SOUR EXT
:TRIG:SOUR BUS
:TRIG:SOUR MAN
:TRIG:DEL
217