Syst:beep; Syst:beep:stat - Agilent Technologies 4288A Programming Manual

:SYST:BEEP

Syntax :SYSTem:BEEPer[:IMMediate]
Description
Produces a beep sound.
If the beep sound is disabled (OFF has been specified with the :SYST:BEEP:STAT
command), no beep sound is produced even if you execute this command. (No query)
Related commands :SYST:BEEP:STAT on page 191
Equivalent key No equivalent key is available on the front panel.
sequence

:SYST:BEEP:STAT

Syntax
:SYSTem:BEEPer:STATe {ON|OFF|1|0}
:SYSTem:BEEPer:STATe?
Description
Turns ON/OFF the beep output.
This command has the same function as the :CALC:COMP:BEEP command.
Parameters
ON or 1 (initial value)
OFF or 0
Query response {1|0}<newline><^END>
Related commands :CALC:COMP:BEEP on page 135
Equivalent key
[Config]
sequence
Chapter 10
Enables the beep sound.
Disables the beep sound.
( [Blue] - [-] ) - Beep
Command Reference
:SYST:BEEP
Description
191