Displaying Cpu Utilization - Edge-Core ECS4660-28F Management Manual

Hide thumbs Also See for ECS4660-28F:

Table of Contents

authentication by a single global password as configured for the password

command, or by passwords set up for specific user-name accounts. The

default is for local passwords configured on the switch.

To configure parameters for the console port:

Click System, then Telnet.

Specify the connection parameters as required.

Figure 22: Telnet Connection Settings

Use the System > CPU Utilization page to display information on CPU

utilization.

"show process cpu" on page 904

The following parameters are displayed:

Time Interval – The interval at which to update the displayed

utilization rate. (Options: 1, 5, 10, 30, 60 seconds; Default: 1 second)

CPU Utilization – CPU utilization over specified interval.

| Basic Management Tasks

Displaying CPU Utilization

Table of Contents