| Security Measures
C
13
HAPTER
Configuring the Secure Shell
I
U
MPORTING
SER
P
K
UBLIC
EYS
Figure 181: Showing the SSH Host Key Pair
Use the Security > SSH (Configure User Key - Copy) page to upload a
user's public key to the switch. This public key must be stored on the
switch for the user to be able to log in using the public key authentication
mechanism. If the user's public key does not exist on the switch, SSH will
revert to the interactive password authentication mechanism to complete
authentication.
CLI R
EFERENCES
"Secure Shell" on page 853
◆
P
ARAMETERS
These parameters are displayed:
User Name – This drop-down box selects the user who's public key
◆
you wish to manage. Note that you must first create users on the User
Accounts page (see
User Key Type – The type of public key to upload.
◆
RSA: The switch accepts a RSA version 1 encrypted public key.
■
DSA: The switch accepts a DSA version 2 encrypted public key.
■
The SSH server uses RSA or DSA for key exchange when the client first
establishes a connection with the switch, and then negotiates with the
client to select either DES (56-bit) or 3DES (168-bit) for data
encryption.
The switch uses only RSA Version 1 for SSHv1.5 clients and DSA
Version 2 for SSHv2 clients.
TFTP Server IP Address – The IP address of the TFTP server that
◆
contains the public key file you wish to import.
Source File Name – The public key file to upload.
◆
– 350 –
"Configuring User Accounts" on page
326).