Time Range
time-range
This section describes the commands used to sets a time range for use by other
functions, such as Access Control Lists.
Table 23: Time Range Commands
Command
time-range
absolute
periodic
show time-range
This command specifies the name of a time range, and enters time range
configuration mode. Use the no form to remove a previously specified time range.
Syntax
[no] time-range name
name - Name of the time range. (Range: 1-16 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command sets a time range for use by other functions, such as Access Control
Lists.
Example
Console(config)#time-range r&d
Console(config-time-range)#
Related Commands
Access Control Lists (319)
Chapter 4
Function
Specifies the name of a time range, and enters time range
configuration mode
Sets the time range for the execution of a command
Sets the time range for the periodic execution of a
command
Shows configured time ranges.
– 141 –
| System Management Commands
Time Range
Mode
GC
TR
TR
PE