Chapter 12
| Security Measures
Access Control Lists
Setting A Time Range
Use the Security > ACL (Configure Time Range) page to sets a time range during
which ACL functions are applied.
Command Usage
If both an absolute rule and one or more periodic rules are configured for the same
time range (i.e., named entry), that entry will only take effect if the current time is
within the absolute time range and one of the periodic time ranges.
Parameters
These parameters are displayed:
Add
◆
Time-Range Name – Name of a time range. (Range: 1-16 characters)
Add Rule
◆
Time-Range – Name of a time range.
◆
Mode
Absolute – Specifies a specific time or time range.
■
Start/End – Specifies the hours, minutes, month, day, and year at which
■
to start or end.
Periodic – Specifies a periodic interval.
■
Start/To – Specifies the days of the week, hours, and minutes at which
■
to start or end.
Web Interface
To configure a time range:
1.
Click Security, ACL.
2.
Select Configure Time Range from the Step list.
3.
Select Add from the Action list.
4.
Enter the name of a time range.
5.
Click Apply.
– 290 –