Table 27: Time Range Commands - Edge-Core ECS4120-28F Reference Manual

Chapter 4
| System Management Commands
Time Range
Time Range
time-range
This section describes the commands used to sets a time range for use by other
functions, such as Access Control Lists.

Table 27: Time Range Commands

Command
time-range
absolute
periodic
show time-range
This command specifies the name of a time range, and enters time range
configuration mode. Use the no form to remove a previously specified time range.
Syntax
[no] time-range name
name - Name of the time range. (Range: 1-32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
◆
This command sets a time range for use by other functions, such as Access
Control Lists.
◆
A maximum of eight rules can be configured for a time range.
Example
Console(config)#time-range r&d
Console(config-time-range)#
Related Commands
Access Control Lists (361)
Function
Specifies the name of a time range, and enters time range
configuration mode
Sets the absolute time range for the execution of a
command
Sets the time range for the periodic execution of a
command
Shows configured time ranges.
– 168 –
Mode
GC
TR
TR
PE