Vapor Separator Draining - TOHATSU BFT 200D Owner's Manual

Hide thumbs Also See for BFT 200D:
Table of Contents

Advertisement

STORAGE

Vapor Separator Draining

WARNING
Gasoline is extremely flammable,
and gasoline vapor can explode,
causing serious injury or death.
Do not smoke or allow flames or
sparks in your working area.
• Be careful not to spill fuel.
Spilled fuel or fuel vapor may
ignite. If any fuel is spilled,
make sure the area is dry
before storing or transporting
the outboard motor.
• Do not smoke or allow flames
or sparks where fuel is drained
or stored.
• KEEP OUT OF REACH OF
CHILDREN.
136
VAPOR
DRAIN
SEPARATOR
TUBE
DRAIN BOLT
1. Unhook the drain tube from the
clip on the lower left of the head
cover.
2. Set the end of the tube toward the
outside of the engine undercase.
https://www.boat-manuals.com/
3. Loosen the vapor separator drain
CLIP
bolt by using a commercially
available flat tip screwdriver.
4. Tilt up the outboard motor.
5. Tilt down the outboard motor, and
drain the vapor separator.
6. After draining thoroughly, tighten
the drain bolt securely.
7. Clip the drain tube on the head
cover.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 225dBft 250d

Table of Contents